A feature of the TEC is the ability to adjust the physical qualities of the material. For example, a change in some consumer properties, such as hardness, elasticity, fire resistance, color.

Our material is excellent for the production of gaskets for doors, windows, containers, car accessories, medical equipment and much more.

TEP seals have a homogeneous smooth structure without defects. After deformation, the elastic profile straightens, retaining its complex shape.


  • Excellent resistance to ozone and ultraviolet irrespective of color of a sealant.
  • Good frost resistance.
  • High strength and durability.
  • The final color of the sealant does not affect the physical quality of the material.
  • Resistance to acids, alkalis and detergents.

An important quality of the material is its functioning in the temperature range from -50 to 50 degrees without loss of properties.

Boots and sole

A significant disadvantage of using PVC materials in the manufacture of boots is low frost resistance. PVC, like rubber, conducts heat well, due to this the shoes are not suitable for use in cold weather.

TEP provides excellent adhesion and high resistance to deformation, low temperatures and bad weather, and guarantees complete waterproofness.


  • The best option for the production of demi-season shoes.
  • The high strength of the material allows active activities without risk of damage to the shoes..
  • TEP shoes do not slip.
  • TEP has low abrasion, which is significantly superior to many thermoplastics and some rubbers..
  • Light weight material provides added comfort and convenience.

Household products

Teromoelastoplasts are widely used in the manufacture of household products. Products made of TEP possess pleasant tactile properties, are resistant to acids, alkalis and detergents, do not scratch, and do not slip under the influence of moisture.

The material can be molded onto a rigid plastic handle during injection molding to create a special soft feel when touched without compromising the strength and rigidity of the base structure. Even a small amount of TEC can significantly improve the perceived quality and value of the product


  • Soft-touch material.
  • Clear structure, smooth or ribbed.
  • A wide range of colors, the ability to add sparkles, pearlescent shades and other modifiers.


Recently, there has been an increase in demand for TEC in the cable industry. This is due to some features of the use of the material in production, such as:

  • The simplicity and high speed of the technological process of applying TPE to the core.
  • Excellent compound performance.
  • Full recyclability.
  • Resistance to bending.

The cable from the TEC can operate at temperatures above +100 C, while the cable from the rubber sheath can only reach +75 C, which avoids damage due to overheating in the cable. Another important difference of cables from TEC is the UV resistance of the material, which significantly increases the operating life.


  • Extended temperature range of operation and, as a result, an increase in the service life of products from 12 to 20 years.
  • Improving the weight and size parameters of the cable due to the low specific gravity of the polymer insulation and reducing the cross section of the copper core.
  • A significant 2–4 times reduction in the technological cycle of cable production due to th transition from a two-stage (rolling and vulcanization) process to extrusion in one stage.

Electronics accessories

Today, TPE has a wide range of applications in many areas of production. Also in a potentially large market for electronics accessories. Our material can be used for the manufacture of protective cases for the phone, headphones, speakers or fitness bracelets. Products made of TPE guarantee the durability of use, achieved due to the exceptional properties of the material, such as:

  • Soft-touch.
  • High strength.
  • Resistance to chemicals.
  • Increased wear resistance.
  • UV Resistant.
  • A diverse palette of colors.
  • Light weight material.

All these properties will allow your products to increase competitiveness in the market and ensure customer loyalty.


Our material is perfect for the manufacture of automotive accessories.

  • High performance: pleasant tactile properties, abrasion resistance, toughness and resistance to UV radiation. Car mats made from TEP provide greater durability and good grip, due to UV resistance, our material does not lose color brightness and does not crack when in contact with the sun.
  • Simple coloring, wide range of colors: our material is easily and qualitatively painted without losing its physical qualities. The ability to paint accessories in the color of the car interior gives a guarantee of the demand for your products.
  • Full recyclability during processing: allows your production to reduce costs and increase production volumes.
  • Faster processing: High melt flow rates reduce casting cycles, resulting in lower energy consumption.